TerraPrinterLaunched in March 2025
Make your own

Bambu Lab A1 mini: build volume, settings and ready-to-print files

What fits on the Bambu Lab A1 mini, how it prints in colour and the settings to start from, and how to make files that open ready to print on it.

At a glance

Build volume
180 × 180 × 180 mm
Largest model, one colour
About 170 × 170 mm
Largest model, multicolour
About 115 × 115 mm, next to the prime tower
Colour
AMS Lite, 4 filaments
Opens ready to print in
Bambu Studio · OrcaSlicer

Settings to start from

These are the defaults of the Bambu Studio profile for the Bambu Lab A1 mini with a 0.4 mm nozzle (0.20mm Standard @BBL A1M). TerraPrinter's ready-to-print files use them.

Layer height
0.2 mm
Walls
2
Top and bottom layers
5 / 3
Infill
15%
Outer wall speed
200 mm/s
Infill speed
270 mm/s

For maps and terrain

Files that open ready to print

Choose the Bambu Lab A1 mini once in TerraPrinter, set the filaments you have loaded, and models open in your slicer with the profile of this printer, your filaments and the model placed on the plate.

  1. Use this printer in TerraPrinter. It is saved on this device, and to your account if you are signed in.
  2. In the Print step, set the Filament slots and the colours under Loaded filaments.
  3. Make a model, then use the Open in button in the download window.

More in how to open a 3MF ready to print and how to reduce purge waste.

Things to make on it

Compare the Bambu Lab A1 mini

Compare with any other printer

Questions

What is the build volume of the Bambu Lab A1 mini?

The Bambu Lab A1 mini prints up to 180 × 180 × 180 mm.

Can the Bambu Lab A1 mini print in several colours?

Yes, with its filament changer (AMS Lite, 4 filaments). Set your filament slots and the colours you have loaded in TerraPrinter and each part of a model goes to the closest filament.

Which slicers open TerraPrinter files ready to print for the Bambu Lab A1 mini?

Bambu Studio, OrcaSlicer. The file opens with the Bambu Lab A1 mini profile, your filaments and the model placed on the plate.

What layer height should I use on the Bambu Lab A1 mini?

Its Bambu Studio profile starts at 0.2 mm. For small terrain models and fine city detail, 0.12 to 0.16 mm looks smoother; for large, simple models 0.2 to 0.28 mm prints faster.

Other printers

All printers

Settings from each slicer's own printer profile, checked 2026-11-15.