TerraPrinterLaunched in March 2025
Make your own

Loading…

How to use the lithophane maker

  1. Press Choose a photo, or drop one on the page.
  2. Pick Panel or Round, then the width, a curve, a frame, a hanging loop or a stand.
  3. Under Picture, adjust the contrast and brightness. Turn the light on and off in the preview to check it.
  4. Download the STL or 3MF and print it standing up, in white PLA, with 100% infill.

Questions

What photos make the best lithophanes?

Photos with clear light and dark areas: faces lit from the side, pets, landscapes and buildings against the sky. Very dark or very flat photos look muddy; raise the contrast for those.

What thickness should a lithophane be?

About 0.8 mm at the thinnest and 3 mm at the thickest for a 0.4 mm nozzle. That is the default. Thicker gives more contrast but needs a brighter light.

How do I print a lithophane?

Print it standing up in white PLA, with 100% infill, a layer height of 0.12 to 0.16 mm and a brim. The thin areas let the light through, so the picture shows when it is lit from behind.

Is my photo uploaded?

No. The photo is read and turned into a model in your browser. It is never sent to our server.

Can I make a lithophane of a place instead?

Yes. Pick Relief shading or City lights under Picture to make one from a mountain, a canyon or your town's streets, or a Moon or Earth lamp.

How to make a map lithophane

More free 3D printing tools

Everything runs in your browser and nothing you make is uploaded. Free for personal and commercial use. How-to guides · 3D map gifts

How the lithophane is made

Thickness is the picture

Every point is between the thinnest and thickest setting: dark parts of the picture are thick and block the light, light parts are thin and glow. Relief shading lights the land from the north-west, so ridges and valleys stand out.

Prints standing up

Panels are built upright with a flat back, the way lithophanes print best, with an optional frame, a hanging loop, a gentle curve or a slotted stand. A round panel suits a window or a lamp front.

Lamps in one piece

A lamp is a hollow ball, smooth inside with the world on the outside, printed upright on its light opening without supports. Near the top the wall is kept thick enough to bridge, and a cupped stand holds an LED tea light.

City lights

Streets from OpenStreetMap are printed thin so they glow, the blocks between them thick and dark: motorways brightest and widest, side streets thinner, footpaths faint, with water and parks in between and a soft glow round the main roads.

Ideas to try: a Moon lamp from real LRO pictures, the Grand Canyon or your home mountain for a window, a City lights night light of your home town, Olympus Mons for a space fan, or a night light of Mars for a child's room.

Elevation: Copernicus DEM GLO-30 (© DLR e.V. & Airbus) and Mapzen Terrain Tiles on AWS; other worlds from NASA, ESA, JAXA and USGS mission data and pictures. City lights streets, water and parks: © OpenStreetMap contributors (ODbL). Map © OpenStreetMap contributors, © CARTO. Want the whole world as a ball? Make a globe, open the TerraPrinter app or see more 3D map gift ideas.