TerraPrinterLaunched in March 2025
Make your own

Loading…

How to use the flow rate test

  1. Choose the step between blocks: 5% to find the area, then 2% to fine-tune.
  2. Download the 3MF. Print the blocks one at a time, each with the flow ratio (Bambu Studio, OrcaSlicer) or extrusion multiplier (PrusaSlicer) from the table.
  3. Look at the top surfaces in raking light: gaps between lines mean too little flow, ridges and a rough edge too much.
  4. Multiply your filament's flow ratio by the best block's number and save it in the filament profile.

Questions

What is flow rate calibration?

Matching the plastic the printer pushes out to what the slicer expects. Filaments differ in diameter and density, so each one prints best with its own flow ratio.

Which block is best?

The one with the smoothest top surface: lines that just touch, with no gaps and no ridges.

Do I need to calibrate flow for every filament?

For each brand and type you use often. A new spool of the same filament usually needs no change.

How to fix under-extrusion

More free 3D printing tools

Everything runs in your browser and nothing you make is uploaded. Free for personal and commercial use. How-to guides · 3D map gifts