Loading…
How to use the place cards
- Paste the guest list under Many names at once, one name per line.
- Pick a font and colours for the table.
- Press Check the names to see each card.
- Download the zip: a file for each guest and the cards laid out on your plates.
Questions
Do the cards need glue?
No. Each card slots into its stand, with a little play so it slides in.
Can every name be the same size?
Yes. The same letter size on every tag is on by default; the longest name sets it.
More free 3D printing tools
Everything runs in your browser and nothing you make is uploaded. Free for personal and commercial use. How-to guides · 3D map gifts
How the name tags work
Letters that fit
The words are real outlines from the font, set to the letter height you pick. If they don't fit the shape, with the space you asked for around them and clear of every hole, they shrink until they do, and the page tells you the size they came out at. Letters a font lacks come from a fallback font, so names like Łukasz or Zoë print whole.
Three ways to letter
Raised letters stand up off the plate for a colour change at one layer. Engraved letters are cut in, for one colour or a wash of paint. Flush letters sit in pockets level with the face, for a multi-colour printer, and look best printed face-down on a smooth or textured plate.
Made to be used
A lanyard slot takes the usual 13 mm clip. Screw holes are countersunk for a No. 6 or M3.5 screw. Magnet pockets get 0.3 mm extra for a press fit, and the plate thickens itself when something inside needs room. The slot stand leaves 0.45 mm of play for the tag.
A whole event
Paste a list of names from a spreadsheet and get a tag for each, all with the same letter size, laid out on your build plate so a table of badges prints in one go.
Fonts: Jost, Work Sans, Bebas Neue, IBM Plex Sans Condensed, Josefin Sans, Tilt Neon, Space Mono, Playfair Display, DM Serif Display, Fraunces, Cormorant Garamond and Shippori Mincho (SIL Open Font License). Icons: Boxicons (MIT). QR codes: qrcode-generator by Kazuhiko Arase (MIT); QR Code is a registered trademark of DENSO WAVE. More to make: map keychains, ornaments, your home in 3D, or every gift maker.