TerraPrinterLaunched in March 2025
Make your own

Bambu Lab A1 mini vs Bambu Lab P1S

The Bambu Lab A1 mini and the Bambu Lab P1S side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.

The Bambu Lab P1S has the larger build volume: 256 × 256 × 250 mm, against 180 × 180 × 180 mm on the Bambu Lab A1 mini.

At the default speeds of their slicer profiles, the Bambu Lab P1S prints our 100 mm terrain tile in about 41 minutes and the Bambu Lab A1 mini in about 44 minutes.

Bambu Lab A1 miniBambu Lab P1S
BrandBambu LabBambu Lab
Build volume180 × 180 × 180 mm256 × 256 × 250 mm
Largest model, one colourAbout 170 × 170 mmAbout 230 × 230 mm
Largest model, multicolourAbout 115 × 115 mmAbout 190 × 190 mm
ColourAMS Lite, 4 filamentsAMS, 4 filaments a unit
Slicer profileBambu StudioBambu Studio
Default layer height0.2 mm0.2 mm
Outer wall speed200 mm/s200 mm/s
Infill speed270 mm/s270 mm/s
Acceleration6000 mm/s²10000 mm/s²
Maximum flow (PLA)21 mm³/s21 mm³/s
100 mm terrain tile, estimated≈ 44 min≈ 41 min
20 mm calibration cube, estimated≈ 10 min≈ 10 min
Opens TerraPrinter files ready to print inBambu Studio · OrcaSlicerBambu Studio · OrcaSlicer

Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.

Questions

Which is bigger, the Bambu Lab A1 mini or the Bambu Lab P1S?

The Bambu Lab P1S has the larger build volume: 256 × 256 × 250 mm, against 180 × 180 × 180 mm on the Bambu Lab A1 mini.

Which is faster, the Bambu Lab A1 mini or the Bambu Lab P1S?

On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 44 minutes on the Bambu Lab A1 mini and about 41 minutes on the Bambu Lab P1S. A rough estimate; your slicer's time is the one to trust.

Can both print in several colours?

The Bambu Lab A1 mini: yes, with its filament changer (AMS Lite, 4 filaments). The Bambu Lab P1S: yes, with its filament changer (AMS, 4 filaments a unit).

Free tools for your printer

Figures from each slicer's own printer profile, checked 2026-11-15.