Bambu Lab A1 vs Bambu Lab A1 mini
The Bambu Lab A1 and the Bambu Lab A1 mini side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.
The Bambu Lab A1 has the larger build volume: 256 × 256 × 256 mm, against 180 × 180 × 180 mm on the Bambu Lab A1 mini.
| Bambu Lab A1 | Bambu Lab A1 mini | |
|---|---|---|
| Brand | Bambu Lab | Bambu Lab |
| Build volume | 256 × 256 × 256 mm | 180 × 180 × 180 mm |
| Largest model, one colour | About 246 × 246 mm | About 170 × 170 mm |
| Largest model, multicolour | About 190 × 190 mm | About 115 × 115 mm |
| Colour | AMS Lite, 4 filaments | AMS Lite, 4 filaments |
| Slicer profile | Bambu Studio | Bambu Studio |
| Default layer height | 0.2 mm | 0.2 mm |
| Outer wall speed | 200 mm/s | 200 mm/s |
| Infill speed | 270 mm/s | 270 mm/s |
| Acceleration | 6000 mm/s² | 6000 mm/s² |
| Maximum flow (PLA) | 21 mm³/s | 21 mm³/s |
| 100 mm terrain tile, estimated | ≈ 44 min | ≈ 44 min |
| 20 mm calibration cube, estimated | ≈ 10 min | ≈ 10 min |
| Opens TerraPrinter files ready to print in | Bambu Studio · OrcaSlicer | Bambu Studio · OrcaSlicer |
Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.
Questions
Which is bigger, the Bambu Lab A1 or the Bambu Lab A1 mini?
The Bambu Lab A1 has the larger build volume: 256 × 256 × 256 mm, against 180 × 180 × 180 mm on the Bambu Lab A1 mini.
Which is faster, the Bambu Lab A1 or the Bambu Lab A1 mini?
On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 44 minutes on the Bambu Lab A1 and about 44 minutes on the Bambu Lab A1 mini. A rough estimate; your slicer's time is the one to trust.
Can both print in several colours?
The Bambu Lab A1: yes, with its filament changer (AMS Lite, 4 filaments). The Bambu Lab A1 mini: yes, with its filament changer (AMS Lite, 4 filaments).
Free tools for your printer
Figures from each slicer's own printer profile, checked 2026-11-15.