Loading…
How to use the name puzzle
- Type the name in The words.
- Pick a bold font and the board and letter colours.
- Leave the knobs on for little fingers.
- Download the 3MF or STL. The letters print separately from the board.
Questions
Is it safe for small children?
Print the letters large enough that they are not a choking hazard, and supervise play. Bigger boards give bigger letters.
Will the letters fit the holes?
Yes. The holes leave a small gap around each letter so they drop in easily.
More free 3D printing tools
Everything runs in your browser and nothing you make is uploaded. Free for personal and commercial use. How-to guides · 3D map gifts
How the name tags work
Letters that fit
The words are real outlines from the font, set to the letter height you pick. If they don't fit the shape, with the space you asked for around them and clear of every hole, they shrink until they do, and the page tells you the size they came out at. Letters a font lacks come from a fallback font, so names like Łukasz or Zoë print whole.
Three ways to letter
Raised letters stand up off the plate for a colour change at one layer. Engraved letters are cut in, for one colour or a wash of paint. Flush letters sit in pockets level with the face, for a multi-colour printer, and look best printed face-down on a smooth or textured plate.
Made to be used
A lanyard slot takes the usual 13 mm clip. Screw holes are countersunk for a No. 6 or M3.5 screw. Magnet pockets get 0.3 mm extra for a press fit, and the plate thickens itself when something inside needs room. The slot stand leaves 0.45 mm of play for the tag.
A whole event
Paste a list of names from a spreadsheet and get a tag for each, all with the same letter size, laid out on your build plate so a table of badges prints in one go.
Fonts: Jost, Work Sans, Bebas Neue, IBM Plex Sans Condensed, Josefin Sans, Tilt Neon, Space Mono, Playfair Display, DM Serif Display, Fraunces, Cormorant Garamond and Shippori Mincho (SIL Open Font License). Icons: Boxicons (MIT). QR codes: qrcode-generator by Kazuhiko Arase (MIT); QR Code is a registered trademark of DENSO WAVE. More to make: map keychains, ornaments, your home in 3D, or every gift maker.