TerraPrinterLaunched in March 2025
Make your own

Loading…

How to use the first layer test

  1. Pick your printer: the squares are placed on its own bed size.
  2. Choose corners and middle, or a 3 × 3 grid, and the first layer thickness your slicer uses.
  3. Download the 3MF and print it without moving the squares.
  4. Compare the squares: each should be smooth and even, with the lines just squashed together.

Questions

What does a good first layer look like?

Smooth and even, with the lines slightly squashed into each other and no gaps. Ridges or a transparent, scraped look mean the nozzle is too close; round, separate lines mean it is too far.

Why do the corners look different?

The bed is not level or not flat. Run the printer's levelling, check the bed is clean, and print the test again.

Will the squares stay where they are?

Yes. The 3MF places them on your printer's bed; keep the slicer from arranging them again.

First layer not sticking? How to fix warping How to fix elephant foot

More free 3D printing tools

Everything runs in your browser and nothing you make is uploaded. Free for personal and commercial use. How-to guides · 3D map gifts