TerraPrinterLaunched in March 2025
Make your own

Bambu Lab H3C: build volume, settings and ready-to-print files

What fits on the Bambu Lab H3C, how it prints in colour and the settings to start from, and how to make files that open ready to print on it.

At a glance

Build volume
330 × 320 × 325 mm
Largest model, one colour
About 310 × 310 mm
Colour
9 filaments ready to switch
Opens ready to print in
Coming soon

Files that open ready to print

Choose the Bambu Lab H3C once in TerraPrinter, set the filaments you have loaded, and models open in your slicer with the profile of this printer, your filaments and the model placed on the plate.

  1. Use this printer in TerraPrinter. It is saved on this device, and to your account if you are signed in.
  2. In the Print step, set the Filament slots and the colours under Loaded filaments.
  3. Make a model, then use the Open in button in the download window.

More in how to open a 3MF ready to print and how to reduce purge waste.

Things to make on it

Questions

What is the build volume of the Bambu Lab H3C?

The Bambu Lab H3C prints up to 330 × 320 × 325 mm.

Can the Bambu Lab H3C print in several colours?

Yes, with its filament changer (9 filaments ready to switch). Set your filament slots and the colours you have loaded in TerraPrinter and each part of a model goes to the closest filament.

Which slicers open TerraPrinter files ready to print for the Bambu Lab H3C?

Not yet: files for the Bambu Lab H3C open as a normal colour 3MF, and you pick the printer in your slicer. Ready-to-print files are being added.

Other printers

All printers

Settings from each slicer's own printer profile, checked 2026-11-15.