Loading…
How to use the temperature tower
- Pick your printer, the material and the layer height you print with.
- Check the hottest and coolest bands. They start from the range in the slicers' own profiles for that material.
- Download the 3MF, open it in PrusaSlicer or OrcaSlicer, and print it with your usual settings for that filament. In Bambu Studio, add the temperature from the table at each height first.
- Pick the band with the cleanest walls, the flattest bridge and the neatest overhang, and use its temperature.
Questions
How does a temperature tower work?
Each band of the tower is printed at a different nozzle temperature, from hot at the bottom to cool at the top. Comparing the bands shows which temperature gives the best surface, bridges and overhangs for that filament.
How is the temperature changed while printing?
The 3MF carries a temperature command (M104) at the first layer of each band, which PrusaSlicer and OrcaSlicer add to the G-code. In Bambu Studio and other slicers, add the commands from the table yourself: in the preview, right-click the layer slider at each height and add custom G-code.
What temperature range should I test?
Start with the range the slicers' own profiles give for the material, then narrow it: for PLA that is usually 190 to 240 °C, for PETG 220 to 270 °C.
Which band is best?
The coolest band that still has strong layers, a flat bridge and a clean overhang. Too hot shows as stringing and drooping, too cool as rough walls and weak layers.
How to fix stringing How to fix under-extrusion Filament temperatures
More free 3D printing tools
Everything runs in your browser and nothing you make is uploaded. Free for personal and commercial use. How-to guides · 3D map gifts