TerraPrinterLaunched in March 2025
Make your own

Loading…

How to use the retraction test

  1. Pick your printer. The table starts from the retraction length in its slicer profile.
  2. Download the 3MF or STL and print it once with each length in the table, changing nothing else.
  3. Keep the shortest retraction that leaves no strings between the towers.
  4. If every print strings, dry the filament or try a band lower on the temperature tower.

Questions

What causes stringing?

Molten plastic oozing from the nozzle while it travels between parts. Too little retraction, too high a temperature or damp filament are the usual causes.

What retraction length should I use?

Direct drive extruders usually need 0.4 to 1.5 mm, Bowden extruders 2.5 to 6 mm. Start from your slicer's profile and go up or down in small steps.

Why not change the retraction on each band?

Retraction is a printer setting in the slicer, so a model file cannot change it part way up. Printing the small test once for each length gives a clear answer.

How to fix stringing

More free 3D printing tools

Everything runs in your browser and nothing you make is uploaded. Free for personal and commercial use. How-to guides · 3D map gifts