Bambu Lab X1E: build volume, settings and ready-to-print files
What fits on the Bambu Lab X1E, how it prints in colour and the settings to start from, and how to make files that open ready to print on it.
At a glance
- Build volume
- 256 × 256 × 250 mm
- Largest model, one colour
- About 230 × 230 mm
- Largest model, multicolour
- About 190 × 190 mm, next to the prime tower
- Colour
- AMS, 4 filaments a unit
- Opens ready to print in
- Bambu Studio · OrcaSlicer
Settings to start from
These are the defaults of the Bambu Studio profile for the Bambu Lab X1E with a 0.4 mm nozzle (0.20mm Standard @BBL X1C). TerraPrinter's ready-to-print files use them.
- Layer height
- 0.2 mm
- Walls
- 2
- Top and bottom layers
- 5 / 3
- Infill
- 15%
- Outer wall speed
- 200 mm/s
- Infill speed
- 270 mm/s
For maps and terrain
- Small models and fine city detail look smoother at 0.12 to 0.16 mm layers; large, simple terrain prints fine at 0.2 to 0.28 mm.
- Terrain needs little infill: 10 to 15% is plenty under a solid top.
- Thin roads and paths need to be at least about 0.8 times the nozzle wide. TerraPrinter's print check warns you and can widen them.
Files that open ready to print
Choose the Bambu Lab X1E once in TerraPrinter, set the filaments you have loaded, and models open in your slicer with the profile of this printer, your filaments and the model placed on the plate.
- Use this printer in TerraPrinter. It is saved on this device, and to your account if you are signed in.
- In the Print step, set the Filament slots and the colours under Loaded filaments.
- Make a model, then use the Open in button in the download window.
More in how to open a 3MF ready to print and how to reduce purge waste.
Things to make on it
Compare the Bambu Lab X1E
Questions
What is the build volume of the Bambu Lab X1E?
The Bambu Lab X1E prints up to 256 × 256 × 250 mm.
Can the Bambu Lab X1E print in several colours?
Yes, with its filament changer (AMS, 4 filaments a unit). Set your filament slots and the colours you have loaded in TerraPrinter and each part of a model goes to the closest filament.
Which slicers open TerraPrinter files ready to print for the Bambu Lab X1E?
Bambu Studio, OrcaSlicer. The file opens with the Bambu Lab X1E profile, your filaments and the model placed on the plate.
What layer height should I use on the Bambu Lab X1E?
Its Bambu Studio profile starts at 0.2 mm. For small terrain models and fine city detail, 0.12 to 0.16 mm looks smoother; for large, simple models 0.2 to 0.28 mm prints faster.
Other printers
Settings from each slicer's own printer profile, checked 2026-11-15.