TerraPrinterLaunched in March 2025
Make your own

Bambu Lab A1 mini vs Prusa MINI

The Bambu Lab A1 mini and the Prusa MINI side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.

Both have about the same build volume, 180 × 180 × 180 mm.

Only the Bambu Lab A1 mini prints several filaments by itself.

At the default speeds of their slicer profiles, the Bambu Lab A1 mini prints our 100 mm terrain tile in about 44 minutes and the Prusa MINI in about 85 minutes.

Bambu Lab A1 miniPrusa MINI
BrandBambu LabPrusa
Build volume180 × 180 × 180 mm180 × 180 × 180 mm
Largest model, one colourAbout 170 × 170 mmAbout 170 × 170 mm
Largest model, multicolourAbout 115 × 115 mm–
ColourAMS Lite, 4 filamentsOne filament at a time
Slicer profileBambu StudioPrusaSlicer
Default layer height0.2 mm0.2 mm
Outer wall speed200 mm/s140 mm/s
Infill speed270 mm/s140 mm/s
Acceleration6000 mm/s²2000 mm/s²
Maximum flow (PLA)21 mm³/s14 mm³/s
100 mm terrain tile, estimated≈ 44 min≈ 85 min
20 mm calibration cube, estimated≈ 10 min≈ 14 min
Opens TerraPrinter files ready to print inBambu Studio · OrcaSlicerOrcaSlicer · PrusaSlicer

Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.

Questions

Which is bigger, the Bambu Lab A1 mini or the Prusa MINI?

Both have about the same build volume, 180 × 180 × 180 mm.

Which is faster, the Bambu Lab A1 mini or the Prusa MINI?

On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 44 minutes on the Bambu Lab A1 mini and about 85 minutes on the Prusa MINI. A rough estimate; your slicer's time is the one to trust.

Can both print in several colours?

The Bambu Lab A1 mini: yes, with its filament changer (AMS Lite, 4 filaments). The Prusa MINI prints one filament at a time; change filament by height for colour.

Free tools for your printer

Figures from each slicer's own printer profile, checked 2026-11-15.