Prusa MINI: build volume, settings and ready-to-print files
What fits on the Prusa MINI, how it prints in colour and the settings to start from, and how to make files that open ready to print on it.
At a glance
- Build volume
- 180 × 180 × 180 mm
- Largest model, one colour
- About 170 × 170 mm
- Colour
- One filament at a time: change filament by height
- Opens ready to print in
- OrcaSlicer · PrusaSlicer
Settings to start from
These are the defaults of the PrusaSlicer profile for the Prusa MINI with a 0.4 mm nozzle (0.20mm SPEED @MINIIS 0.4). TerraPrinter's ready-to-print files use them.
- Layer height
- 0.2 mm
- Walls
- 2
- Top and bottom layers
- 5 / 4
- Infill
- 15%
- Outer wall speed
- 140 mm/s
- Infill speed
- 140 mm/s
For maps and terrain
- Small models and fine city detail look smoother at 0.12 to 0.16 mm layers; large, simple terrain prints fine at 0.2 to 0.28 mm.
- Terrain needs little infill: 10 to 15% is plenty under a solid top.
- Thin roads and paths need to be at least about 0.8 times the nozzle wide. TerraPrinter's print check warns you and can widen them.
Files that open ready to print
Choose the Prusa MINI once in TerraPrinter, set the filaments you have loaded, and models open in your slicer with the profile of this printer, your filaments and the model placed on the plate.
- Use this printer in TerraPrinter. It is saved on this device, and to your account if you are signed in.
- In the Print step, set the Filament slots and the colours under Loaded filaments.
- Make a model, then use the Open in button in the download window.
More in how to open a 3MF ready to print and multicolour printing without an AMS.
Things to make on it
Compare the Prusa MINI
Questions
What is the build volume of the Prusa MINI?
The Prusa MINI prints up to 180 × 180 × 180 mm.
Can the Prusa MINI print in several colours?
It prints one filament at a time, but you can still print in colour by changing filament at set layers. TerraPrinter's Colour plan lists the heights to pause at.
Which slicers open TerraPrinter files ready to print for the Prusa MINI?
OrcaSlicer, PrusaSlicer. The file opens with the Prusa MINI profile, your filaments and the model placed on the plate.
What layer height should I use on the Prusa MINI?
Its PrusaSlicer profile starts at 0.2 mm. For small terrain models and fine city detail, 0.12 to 0.16 mm looks smoother; for large, simple models 0.2 to 0.28 mm prints faster.
Other printers
Settings from each slicer's own printer profile, checked 2026-11-15.