Prusa MINI vs Prusa MK4S
The Prusa MINI and the Prusa MK4S side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.
The Prusa MK4S has the larger build volume: 250 × 210 × 220 mm, against 180 × 180 × 180 mm on the Prusa MINI.
Only the Prusa MK4S prints several filaments by itself.
At the default speeds of their slicer profiles, the Prusa MK4S prints our 100 mm terrain tile in about 59 minutes and the Prusa MINI in about 85 minutes.
| Prusa MINI | Prusa MK4S | |
|---|---|---|
| Brand | Prusa | Prusa |
| Build volume | 180 × 180 × 180 mm | 250 × 210 × 220 mm |
| Largest model, one colour | About 170 × 170 mm | About 200 × 200 mm |
| Largest model, multicolour | – | About 185 × 185 mm |
| Colour | One filament at a time | MMU3, 5 filaments |
| Slicer profile | PrusaSlicer | PrusaSlicer |
| Default layer height | 0.2 mm | 0.2 mm |
| Outer wall speed | 140 mm/s | 170 mm/s |
| Infill speed | 140 mm/s | 200 mm/s |
| Acceleration | 2000 mm/s² | 4000 mm/s² |
| Maximum flow (PLA) | 14 mm³/s | 15 mm³/s |
| 100 mm terrain tile, estimated | ≈ 85 min | ≈ 59 min |
| 20 mm calibration cube, estimated | ≈ 14 min | ≈ 12 min |
| Opens TerraPrinter files ready to print in | OrcaSlicer · PrusaSlicer | OrcaSlicer · PrusaSlicer |
Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.
Questions
Which is bigger, the Prusa MINI or the Prusa MK4S?
The Prusa MK4S has the larger build volume: 250 × 210 × 220 mm, against 180 × 180 × 180 mm on the Prusa MINI.
Which is faster, the Prusa MINI or the Prusa MK4S?
On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 85 minutes on the Prusa MINI and about 59 minutes on the Prusa MK4S. A rough estimate; your slicer's time is the one to trust.
Can both print in several colours?
The Prusa MINI prints one filament at a time; change filament by height for colour. The Prusa MK4S: yes, with its filament changer (MMU3, 5 filaments).
Free tools for your printer
Figures from each slicer's own printer profile, checked 2026-11-15.