TerraPrinterLaunched in March 2025
Make your own

Prusa MK4: build volume, settings and ready-to-print files

What fits on the Prusa MK4, how it prints in colour and the settings to start from, and how to make files that open ready to print on it.

At a glance

Build volume
250 × 210 × 220 mm
Largest model, one colour
About 200 × 200 mm
Largest model, multicolour
About 185 × 185 mm, next to the prime tower
Colour
MMU3, 5 filaments
Opens ready to print in
OrcaSlicer · PrusaSlicer

Settings to start from

These are the defaults of the PrusaSlicer profile for the Prusa MK4 with a 0.4 mm nozzle (0.20mm SPEED @MK4IS 0.4). TerraPrinter's ready-to-print files use them.

Layer height
0.2 mm
Walls
2
Top and bottom layers
5 / 3
Infill
15%
Outer wall speed
170 mm/s
Infill speed
200 mm/s

For maps and terrain

Files that open ready to print

Choose the Prusa MK4 once in TerraPrinter, set the filaments you have loaded, and models open in your slicer with the profile of this printer, your filaments and the model placed on the plate.

  1. Use this printer in TerraPrinter. It is saved on this device, and to your account if you are signed in.
  2. In the Print step, set the Filament slots and the colours under Loaded filaments.
  3. Make a model, then use the Open in button in the download window.

More in how to open a 3MF ready to print and how to reduce purge waste.

Things to make on it

Compare the Prusa MK4

Compare with any other printer

Questions

What is the build volume of the Prusa MK4?

The Prusa MK4 prints up to 250 × 210 × 220 mm.

Can the Prusa MK4 print in several colours?

Yes, with its filament changer (MMU3, 5 filaments). Set your filament slots and the colours you have loaded in TerraPrinter and each part of a model goes to the closest filament.

Which slicers open TerraPrinter files ready to print for the Prusa MK4?

OrcaSlicer, PrusaSlicer. The file opens with the Prusa MK4 profile, your filaments and the model placed on the plate.

What layer height should I use on the Prusa MK4?

Its PrusaSlicer profile starts at 0.2 mm. For small terrain models and fine city detail, 0.12 to 0.16 mm looks smoother; for large, simple models 0.2 to 0.28 mm prints faster.

Other printers

All printers

Settings from each slicer's own printer profile, checked 2026-11-15.