Prusa MK4 vs Prusa MK4S
The Prusa MK4 and the Prusa MK4S side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.
Both have about the same build volume, 250 × 210 × 220 mm.
| Prusa MK4 | Prusa MK4S | |
|---|---|---|
| Brand | Prusa | Prusa |
| Build volume | 250 × 210 × 220 mm | 250 × 210 × 220 mm |
| Largest model, one colour | About 200 × 200 mm | About 200 × 200 mm |
| Largest model, multicolour | About 185 × 185 mm | About 185 × 185 mm |
| Colour | MMU3, 5 filaments | MMU3, 5 filaments |
| Slicer profile | PrusaSlicer | PrusaSlicer |
| Default layer height | 0.2 mm | 0.2 mm |
| Outer wall speed | 170 mm/s | 170 mm/s |
| Infill speed | 200 mm/s | 200 mm/s |
| Acceleration | 4000 mm/s² | 4000 mm/s² |
| Maximum flow (PLA) | 15 mm³/s | 15 mm³/s |
| 100 mm terrain tile, estimated | ≈ 59 min | ≈ 59 min |
| 20 mm calibration cube, estimated | ≈ 12 min | ≈ 12 min |
| Opens TerraPrinter files ready to print in | OrcaSlicer · PrusaSlicer | OrcaSlicer · PrusaSlicer |
Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.
Questions
Which is bigger, the Prusa MK4 or the Prusa MK4S?
Both have about the same build volume, 250 × 210 × 220 mm.
Which is faster, the Prusa MK4 or the Prusa MK4S?
On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 59 minutes on the Prusa MK4 and about 59 minutes on the Prusa MK4S. A rough estimate; your slicer's time is the one to trust.
Can both print in several colours?
The Prusa MK4: yes, with its filament changer (MMU3, 5 filaments). The Prusa MK4S: yes, with its filament changer (MMU3, 5 filaments).
Free tools for your printer
Figures from each slicer's own printer profile, checked 2026-11-15.