Creality Ender-3 V2: build volume, settings and ready-to-print files
What fits on the Creality Ender-3 V2, how it prints in colour and the settings to start from, and how to make files that open ready to print on it.
At a glance
- Build volume
- 220 × 220 × 250 mm
- Largest model, one colour
- About 210 × 210 mm
- Colour
- One filament at a time: change filament by height
- Opens ready to print in
- OrcaSlicer
Settings to start from
These are the defaults of the OrcaSlicer profile for the Creality Ender-3 V2 with a 0.4 mm nozzle (0.20mm Standard @Creality Ender3V2). TerraPrinter's ready-to-print files use them.
- Layer height
- 0.2 mm
- Walls
- 3
- Top and bottom layers
- 4 / 3
- Infill
- 15%
- Outer wall speed
- 25 mm/s
- Infill speed
- 50 mm/s
For maps and terrain
- Small models and fine city detail look smoother at 0.12 to 0.16 mm layers; large, simple terrain prints fine at 0.2 to 0.28 mm.
- Terrain needs little infill: 10 to 15% is plenty under a solid top.
- Thin roads and paths need to be at least about 0.8 times the nozzle wide. TerraPrinter's print check warns you and can widen them.
Files that open ready to print
Choose the Creality Ender-3 V2 once in TerraPrinter, set the filaments you have loaded, and models open in your slicer with the profile of this printer, your filaments and the model placed on the plate.
- Use this printer in TerraPrinter. It is saved on this device, and to your account if you are signed in.
- In the Print step, set the Filament slots and the colours under Loaded filaments.
- Make a model, then use the Open in button in the download window.
More in how to open a 3MF ready to print and multicolour printing without an AMS.
Things to make on it
Compare the Creality Ender-3 V2
Questions
What is the build volume of the Creality Ender-3 V2?
The Creality Ender-3 V2 prints up to 220 × 220 × 250 mm.
Can the Creality Ender-3 V2 print in several colours?
It prints one filament at a time, but you can still print in colour by changing filament at set layers. TerraPrinter's Colour plan lists the heights to pause at.
Which slicers open TerraPrinter files ready to print for the Creality Ender-3 V2?
OrcaSlicer. The file opens with the Creality Ender-3 V2 profile, your filaments and the model placed on the plate.
What layer height should I use on the Creality Ender-3 V2?
Its OrcaSlicer profile starts at 0.2 mm. For small terrain models and fine city detail, 0.12 to 0.16 mm looks smoother; for large, simple models 0.2 to 0.28 mm prints faster.
Other printers
Settings from each slicer's own printer profile, checked 2026-11-15.