TerraPrinterLaunched in March 2025
Make your own

Creality Ender-3 V2 vs Creality Ender-3 V3

The Creality Ender-3 V2 and the Creality Ender-3 V3 side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.

Both have about the same build volume, 220 × 220 × 250 mm.

At the default speeds of their slicer profiles, the Creality Ender-3 V3 prints our 100 mm terrain tile in about 55 minutes and the Creality Ender-3 V2 in about 364 minutes.

Creality Ender-3 V2Creality Ender-3 V3
BrandCrealityCreality
Build volume220 × 220 × 250 mm220 × 220 × 250 mm
Largest model, one colourAbout 210 × 210 mmAbout 210 × 210 mm
Largest model, multicolour––
ColourOne filament at a timeOne filament at a time
Slicer profileOrcaSlicerOrcaSlicer
Default layer height0.2 mm0.2 mm
Outer wall speed25 mm/s200 mm/s
Infill speed50 mm/s500 mm/s
Acceleration500 mm/s²12000 mm/s²
Maximum flow (PLA)12 mm³/s14 mm³/s
100 mm terrain tile, estimated≈ 364 min≈ 55 min
20 mm calibration cube, estimated≈ 45 min≈ 11 min
Opens TerraPrinter files ready to print inOrcaSlicerOrcaSlicer

Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.

Questions

Which is bigger, the Creality Ender-3 V2 or the Creality Ender-3 V3?

Both have about the same build volume, 220 × 220 × 250 mm.

Which is faster, the Creality Ender-3 V2 or the Creality Ender-3 V3?

On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 364 minutes on the Creality Ender-3 V2 and about 55 minutes on the Creality Ender-3 V3. A rough estimate; your slicer's time is the one to trust.

Can both print in several colours?

The Creality Ender-3 V2 prints one filament at a time; change filament by height for colour. The Creality Ender-3 V3 prints one filament at a time; change filament by height for colour.

Free tools for your printer

Figures from each slicer's own printer profile, checked 2026-11-15.