3D printing filaments
The common filaments side by side, with the temperatures the slicers' own profiles use and what each one is good for. Pick one for its settings, tips and questions.
| Filament | Nozzle | Bed | Density | 1 kg of 1.75 mm |
|---|---|---|---|---|
| PLA | 220 °C | 55–60 °C | 1.24 g/cm³ | ≈ 335 m |
| PLA Matte | 220 °C | 55 °C | 1.24 g/cm³ | ≈ 335 m |
| PETG | 240–255 °C | 70–90 °C | 1.27 g/cm³ | ≈ 327 m |
| ABS | 260–270 °C | 90–110 °C | 1.04 g/cm³ | ≈ 400 m |
| ASA | 260–270 °C | 90–110 °C | 1.07 g/cm³ | ≈ 389 m |
| TPU | 230–240 °C | 35–50 °C | 1.22 g/cm³ | ≈ 341 m |
Nozzle and bed: the range of the defaults in the Bambu Studio, OrcaSlicer and PrusaSlicer profiles. Your brand's own advice comes first.
PLAThe filament most prints start with: it prints at modest temperatures, barely warps, needs no enclosure and comes in more colours and finishes than any other.
PLA MattePLA with a flat, chalky finish that hides layer lines. It prints like ordinary PLA, and terrain and city models look more like plaster or stone in it.
PETGTougher and more heat-resistant than PLA, with a glossy finish. A good choice for parts that live outdoors or in a warm room, at the cost of a little more stringing.
ABSA tough, heat-resistant plastic for functional parts. It shrinks as it cools, so it prints best in an enclosed printer, with ventilation for the fumes.
ASALike ABS, but made to stand up to sunlight: it keeps its colour and strength outdoors. It prints like ABS, enclosed and ventilated.
TPUA flexible, rubbery filament for parts that bend, squash and grip. It prints slowly, and a direct-drive extruder handles it much better than a Bowden tube.
Tune a new filament
Temperature tower · Retraction test · Flow rate test · Filament cost calculator