PLA Matte print settings and tips
PLA with a flat, chalky finish that hides layer lines. It prints like ordinary PLA, and terrain and city models look more like plaster or stone in it.
At a glance
- Nozzle
- 220 °C
- Range to test
- 190–240 °C
- Bed
- 55 °C
- Density
- 1.24 g/cm³
- 1 kg of 1.75 mm
- ≈ 335 m
- 1 kg of 2.85 mm
- ≈ 126 m
In each slicer's profile
| Slicer | Nozzle | First layer | Bed | Fan | Max flow |
|---|---|---|---|---|---|
| Bambu Studio Bambu PLA Matte @BBL P1S 0.4 nozzle | 220 °C | 220 °C | 55 °C | 100–100% | 22 mm³/s |
| OrcaSlicer Generic PLA Matte @Creality K1-all | 220 °C | 220 °C | 55 °C | 100–100% | 18 mm³/s |
As each slicer ships its profile for a 0.4 mm nozzle (Bambu Studio for the P1S, OrcaSlicer for the Creality K1, PrusaSlicer for the MK4S). The profile named after a brand is that brand's own filament.
Good for
- Terrain and relief models, where a matte surface reads like a real landscape
- City models and architectural models
- Decorative prints and gifts
Not the best for
- Lithophanes: the matte filler scatters light and blurs the picture
- Hot places, as with any PLA
Printing it well
- Print it with your PLA settings, then fine-tune with a temperature tower.
- Some matte filaments are a little more brittle than plain PLA: give thin parts an extra wall.
Tune it for your printer
Temperature tower · Retraction test · Flow rate test · What a print costs
Questions
What temperature should I print PLA Matte at?
The slicers' own profiles print it at 220 °C on the nozzle, within a range of 190 to 240 °C. Print a temperature tower to find the best value for your brand.
What bed temperature does PLA Matte need?
The slicer profiles heat the bed to 55 °C.
How many metres are on a 1 kg spool of PLA Matte?
About 335 m of 1.75 mm filament, or 126 m of 2.85 mm, at a density of 1.24 g/cm³.
Is matte PLA good for terrain models?
Yes, it is a favourite for them: the flat finish hides layer lines on slopes and makes colours look like a printed map.
Does matte PLA need different settings?
Barely. The slicer profiles use the same temperatures as for plain PLA.
Other filaments
Settings from each slicer's own filament profile, checked 2026-11-15.