ASA print settings and tips
Like ABS, but made to stand up to sunlight: it keeps its colour and strength outdoors. It prints like ABS, enclosed and ventilated.
At a glance
- Nozzle
- 260–270 °C
- Range to test
- 240–280 °C
- Bed
- 90–110 °C
- Density
- 1.07 g/cm³
- 1 kg of 1.75 mm
- ≈ 389 m
- 1 kg of 2.85 mm
- ≈ 146 m
In each slicer's profile
| Slicer | Nozzle | First layer | Bed | Fan | Max flow |
|---|---|---|---|---|---|
| Bambu Studio Bambu ASA @BBL X1C 0.4 nozzle | 270 °C | 270 °C | 100 °C | 10–35% | 18 mm³/s |
| OrcaSlicer Generic ASA @Creality | 260 °C | 260 °C | 90 °C | 10–80% | 12 mm³/s |
| PrusaSlicer Prusament ASA @MK4S | 260 °C | 260 °C | 110 °C | 12–12% | 15 mm³/s |
As each slicer ships its profile for a 0.4 mm nozzle (Bambu Studio for the P1S, OrcaSlicer for the Creality K1, PrusaSlicer for the MK4S). The profile named after a brand is that brand's own filament.
Good for
- Outdoor signs, house numbers and garden parts
- Car parts and anything in the sun
- Functional parts that get warm
Not the best for
- Open-frame printers in a cold room
- Unventilated rooms
Printing it well
- Print it enclosed, with the chamber warm and the fan low, as for ABS.
- A brim helps large flat parts stay down.
Tune it for your printer
Temperature tower · Retraction test · Flow rate test · What a print costs
Questions
What temperature should I print ASA at?
The slicers' own profiles print it at 260–270 °C on the nozzle, within a range of 240 to 280 °C. Print a temperature tower to find the best value for your brand.
What bed temperature does ASA need?
The slicer profiles heat the bed to 90–110 °C.
How many metres are on a 1 kg spool of ASA?
About 389 m of 1.75 mm filament, or 146 m of 2.85 mm, at a density of 1.07 g/cm³.
What is the difference between ASA and ABS?
ASA resists sunlight and weather; ABS yellows and turns brittle outdoors. They print in much the same way.
Is ASA good for outdoor signs?
Yes, it is one of the best choices for signs and parts that stay outside all year.
Other filaments
Settings from each slicer's own filament profile, checked 2026-11-15.