ABS print settings and tips
A tough, heat-resistant plastic for functional parts. It shrinks as it cools, so it prints best in an enclosed printer, with ventilation for the fumes.
At a glance
- Nozzle
- 260–270 °C
- Range to test
- 240–280 °C
- Bed
- 90–110 °C
- Density
- 1.04 g/cm³
- 1 kg of 1.75 mm
- ≈ 400 m
- 1 kg of 2.85 mm
- ≈ 151 m
In each slicer's profile
| Slicer | Nozzle | First layer | Bed | Fan | Max flow |
|---|---|---|---|---|---|
| Bambu Studio Bambu ABS @BBL P1S 0.4 nozzle | 270 °C | 260 °C | 90 °C | 10–60% | 16 mm³/s |
| OrcaSlicer Generic ABS @Creality | 270 °C | 260 °C | 90 °C | 10–80% | 12 mm³/s |
| PrusaSlicer Generic ABS @MK4S | 260 °C | 260 °C | 110 °C | 10–10% | 15 mm³/s |
As each slicer ships its profile for a 0.4 mm nozzle (Bambu Studio for the P1S, OrcaSlicer for the Creality K1, PrusaSlicer for the MK4S). The profile named after a brand is that brand's own filament.
Good for
- Parts that get warm: around engines, lamps or electronics
- Functional parts that are sanded, drilled or glued
- Parts smoothed with acetone vapour
Not the best for
- Open-frame printers in a cold room: large parts warp and crack
- Printing in a room where people sleep or work without ventilation
Printing it well
- Close the enclosure and let the chamber warm up before printing.
- Turn the part cooling fan well down.
- Use a brim on large flat parts to stop the corners lifting.
Tune it for your printer
Temperature tower · Retraction test · Flow rate test · What a print costs
Questions
What temperature should I print ABS at?
The slicers' own profiles print it at 260–270 °C on the nozzle, within a range of 240 to 280 °C. Print a temperature tower to find the best value for your brand.
What bed temperature does ABS need?
The slicer profiles heat the bed to 90–110 °C.
How many metres are on a 1 kg spool of ABS?
About 400 m of 1.75 mm filament, or 151 m of 2.85 mm, at a density of 1.04 g/cm³.
Do I need an enclosure for ABS?
For anything but small parts, yes. Without one the plastic cools unevenly and large prints warp or split between layers.
Is ABS printing safe?
It gives off fumes while printing. Print it in an enclosed printer with a filter, or in a ventilated room away from where people spend their time.
Other filaments
Settings from each slicer's own filament profile, checked 2026-11-15.