TerraPrinterLaunched in March 2025
Make your own

Bambu Lab X1 Carbon vs Bambu Lab H2S

The Bambu Lab X1 Carbon and the Bambu Lab H2S side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.

The Bambu Lab H2S has the larger build volume: 340 × 320 × 340 mm, against 256 × 256 × 250 mm on the Bambu Lab X1 Carbon.

At the default speeds of their slicer profiles, the Bambu Lab H2S prints our 100 mm terrain tile in about 36 minutes and the Bambu Lab X1 Carbon in about 41 minutes.

Bambu Lab X1 CarbonBambu Lab H2S
BrandBambu LabBambu Lab
Build volume256 × 256 × 250 mm340 × 320 × 340 mm
Largest model, one colourAbout 230 × 230 mmAbout 310 × 310 mm
Largest model, multicolourAbout 190 × 190 mmAbout 250 × 250 mm
ColourAMS, 4 filaments a unitAMS, 4 filaments a unit
Slicer profileBambu StudioBambu Studio
Default layer height0.2 mm0.2 mm
Outer wall speed200 mm/s200 mm/s
Infill speed270 mm/s350 mm/s
Acceleration10000 mm/s²10000 mm/s²
Maximum flow (PLA)21 mm³/s25 mm³/s
100 mm terrain tile, estimated≈ 41 min≈ 36 min
20 mm calibration cube, estimated≈ 10 min≈ 9 min
Opens TerraPrinter files ready to print inBambu Studio · OrcaSlicerBambu Studio · OrcaSlicer

Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.

Questions

Which is bigger, the Bambu Lab X1 Carbon or the Bambu Lab H2S?

The Bambu Lab H2S has the larger build volume: 340 × 320 × 340 mm, against 256 × 256 × 250 mm on the Bambu Lab X1 Carbon.

Which is faster, the Bambu Lab X1 Carbon or the Bambu Lab H2S?

On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 41 minutes on the Bambu Lab X1 Carbon and about 36 minutes on the Bambu Lab H2S. A rough estimate; your slicer's time is the one to trust.

Can both print in several colours?

The Bambu Lab X1 Carbon: yes, with its filament changer (AMS, 4 filaments a unit). The Bambu Lab H2S: yes, with its filament changer (AMS, 4 filaments a unit).

Free tools for your printer

Figures from each slicer's own printer profile, checked 2026-11-15.