Bambu Lab X1 Carbon vs Bambu Lab H2D
The Bambu Lab X1 Carbon and the Bambu Lab H2D side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.
The Bambu Lab H2D has the larger build volume: 325 × 320 × 325 mm, against 256 × 256 × 250 mm on the Bambu Lab X1 Carbon.
At the default speeds of their slicer profiles, the Bambu Lab H2D prints our 100 mm terrain tile in about 36 minutes and the Bambu Lab X1 Carbon in about 41 minutes.
| Bambu Lab X1 Carbon | Bambu Lab H2D | |
|---|---|---|
| Brand | Bambu Lab | Bambu Lab |
| Build volume | 256 × 256 × 250 mm | 325 × 320 × 325 mm |
| Largest model, one colour | About 230 × 230 mm | About 310 × 310 mm |
| Largest model, multicolour | About 190 × 190 mm | About 265 × 265 mm |
| Colour | AMS, 4 filaments a unit | AMS, 4 filaments a unit, two nozzles |
| Slicer profile | Bambu Studio | OrcaSlicer |
| Default layer height | 0.2 mm | 0.2 mm |
| Outer wall speed | 200 mm/s | 200 mm/s |
| Infill speed | 270 mm/s | 350 mm/s |
| Acceleration | 10000 mm/s² | 8000 mm/s² |
| Maximum flow (PLA) | 21 mm³/s | 25 mm³/s |
| 100 mm terrain tile, estimated | ≈ 41 min | ≈ 36 min |
| 20 mm calibration cube, estimated | ≈ 10 min | ≈ 9 min |
| Opens TerraPrinter files ready to print in | Bambu Studio · OrcaSlicer | OrcaSlicer |
Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.
Questions
Which is bigger, the Bambu Lab X1 Carbon or the Bambu Lab H2D?
The Bambu Lab H2D has the larger build volume: 325 × 320 × 325 mm, against 256 × 256 × 250 mm on the Bambu Lab X1 Carbon.
Which is faster, the Bambu Lab X1 Carbon or the Bambu Lab H2D?
On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 41 minutes on the Bambu Lab X1 Carbon and about 36 minutes on the Bambu Lab H2D. A rough estimate; your slicer's time is the one to trust.
Can both print in several colours?
The Bambu Lab X1 Carbon: yes, with its filament changer (AMS, 4 filaments a unit). The Bambu Lab H2D: yes, with its filament changer (AMS, 4 filaments a unit, two nozzles).
Free tools for your printer
Figures from each slicer's own printer profile, checked 2026-11-15.