TerraPrinterLaunched in March 2025
Make your own

Prusa MK4S vs Prusa XL

The Prusa MK4S and the Prusa XL side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.

The Prusa XL has the larger build volume: 360 × 360 × 360 mm, against 250 × 210 × 220 mm on the Prusa MK4S.

Prusa MK4SPrusa XL
BrandPrusaPrusa
Build volume250 × 210 × 220 mm360 × 360 × 360 mm
Largest model, one colourAbout 200 × 200 mmAbout 350 × 350 mm
Largest model, multicolourAbout 185 × 185 mmAbout 295 × 295 mm
ColourMMU3, 5 filamentsUp to 5 toolheads
Slicer profilePrusaSlicerPrusaSlicer
Default layer height0.2 mm0.2 mm
Outer wall speed170 mm/s170 mm/s
Infill speed200 mm/s200 mm/s
Acceleration4000 mm/s²2500 mm/s²
Maximum flow (PLA)15 mm³/s15 mm³/s
100 mm terrain tile, estimated≈ 59 min≈ 59 min
20 mm calibration cube, estimated≈ 12 min≈ 12 min
Opens TerraPrinter files ready to print inOrcaSlicer · PrusaSlicerOrcaSlicer · PrusaSlicer

Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.

Questions

Which is bigger, the Prusa MK4S or the Prusa XL?

The Prusa XL has the larger build volume: 360 × 360 × 360 mm, against 250 × 210 × 220 mm on the Prusa MK4S.

Which is faster, the Prusa MK4S or the Prusa XL?

On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 59 minutes on the Prusa MK4S and about 59 minutes on the Prusa XL. A rough estimate; your slicer's time is the one to trust.

Can both print in several colours?

The Prusa MK4S: yes, with its filament changer (MMU3, 5 filaments). The Prusa XL: yes, with its filament changer (Up to 5 toolheads).

Free tools for your printer

Figures from each slicer's own printer profile, checked 2026-11-15.