Prusa MK3S vs Prusa MK4S
The Prusa MK3S and the Prusa MK4S side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.
The Prusa MK4S has the larger build volume: 250 × 210 × 220 mm, against 250 × 210 × 210 mm on the Prusa MK3S.
At the default speeds of their slicer profiles, the Prusa MK4S prints our 100 mm terrain tile in about 59 minutes and the Prusa MK3S in about 216 minutes.
| Prusa MK3S | Prusa MK4S | |
|---|---|---|
| Brand | Prusa | Prusa |
| Build volume | 250 × 210 × 210 mm | 250 × 210 × 220 mm |
| Largest model, one colour | About 200 × 200 mm | About 200 × 200 mm |
| Largest model, multicolour | About 185 × 185 mm | About 185 × 185 mm |
| Colour | MMU3, 5 filaments | MMU3, 5 filaments |
| Slicer profile | PrusaSlicer | PrusaSlicer |
| Default layer height | 0.2 mm | 0.2 mm |
| Outer wall speed | 25 mm/s | 170 mm/s |
| Infill speed | 80 mm/s | 200 mm/s |
| Acceleration | 1000 mm/s² | 4000 mm/s² |
| Maximum flow (PLA) | 15 mm³/s | 15 mm³/s |
| 100 mm terrain tile, estimated | ≈ 216 min | ≈ 59 min |
| 20 mm calibration cube, estimated | ≈ 29 min | ≈ 12 min |
| Opens TerraPrinter files ready to print in | OrcaSlicer · PrusaSlicer | OrcaSlicer · PrusaSlicer |
Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.
Questions
Which is bigger, the Prusa MK3S or the Prusa MK4S?
The Prusa MK4S has the larger build volume: 250 × 210 × 220 mm, against 250 × 210 × 210 mm on the Prusa MK3S.
Which is faster, the Prusa MK3S or the Prusa MK4S?
On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 216 minutes on the Prusa MK3S and about 59 minutes on the Prusa MK4S. A rough estimate; your slicer's time is the one to trust.
Can both print in several colours?
The Prusa MK3S: yes, with its filament changer (MMU3, 5 filaments). The Prusa MK4S: yes, with its filament changer (MMU3, 5 filaments).
Free tools for your printer
Figures from each slicer's own printer profile, checked 2026-11-15.