TerraPrinterLaunched in March 2025
Make your own

Bambu Lab P1S vs Bambu Lab X1 Carbon

The Bambu Lab P1S and the Bambu Lab X1 Carbon side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.

Both have about the same build volume, 256 × 256 × 250 mm.

Bambu Lab P1SBambu Lab X1 Carbon
BrandBambu LabBambu Lab
Build volume256 × 256 × 250 mm256 × 256 × 250 mm
Largest model, one colourAbout 230 × 230 mmAbout 230 × 230 mm
Largest model, multicolourAbout 190 × 190 mmAbout 190 × 190 mm
ColourAMS, 4 filaments a unitAMS, 4 filaments a unit
Slicer profileBambu StudioBambu Studio
Default layer height0.2 mm0.2 mm
Outer wall speed200 mm/s200 mm/s
Infill speed270 mm/s270 mm/s
Acceleration10000 mm/s²10000 mm/s²
Maximum flow (PLA)21 mm³/s21 mm³/s
100 mm terrain tile, estimated≈ 41 min≈ 41 min
20 mm calibration cube, estimated≈ 10 min≈ 10 min
Opens TerraPrinter files ready to print inBambu Studio · OrcaSlicerBambu Studio · OrcaSlicer

Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.

Questions

Which is bigger, the Bambu Lab P1S or the Bambu Lab X1 Carbon?

Both have about the same build volume, 256 × 256 × 250 mm.

Which is faster, the Bambu Lab P1S or the Bambu Lab X1 Carbon?

On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 41 minutes on the Bambu Lab P1S and about 41 minutes on the Bambu Lab X1 Carbon. A rough estimate; your slicer's time is the one to trust.

Can both print in several colours?

The Bambu Lab P1S: yes, with its filament changer (AMS, 4 filaments a unit). The Bambu Lab X1 Carbon: yes, with its filament changer (AMS, 4 filaments a unit).

Free tools for your printer

Figures from each slicer's own printer profile, checked 2026-11-15.