TerraPrinterLaunched in March 2025
Make your own

Bambu Lab P1S vs Prusa MK4S

The Bambu Lab P1S and the Prusa MK4S side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.

The Bambu Lab P1S has the larger build volume: 256 × 256 × 250 mm, against 250 × 210 × 220 mm on the Prusa MK4S.

At the default speeds of their slicer profiles, the Bambu Lab P1S prints our 100 mm terrain tile in about 41 minutes and the Prusa MK4S in about 59 minutes.

Bambu Lab P1SPrusa MK4S
BrandBambu LabPrusa
Build volume256 × 256 × 250 mm250 × 210 × 220 mm
Largest model, one colourAbout 230 × 230 mmAbout 200 × 200 mm
Largest model, multicolourAbout 190 × 190 mmAbout 185 × 185 mm
ColourAMS, 4 filaments a unitMMU3, 5 filaments
Slicer profileBambu StudioPrusaSlicer
Default layer height0.2 mm0.2 mm
Outer wall speed200 mm/s170 mm/s
Infill speed270 mm/s200 mm/s
Acceleration10000 mm/s²4000 mm/s²
Maximum flow (PLA)21 mm³/s15 mm³/s
100 mm terrain tile, estimated≈ 41 min≈ 59 min
20 mm calibration cube, estimated≈ 10 min≈ 12 min
Opens TerraPrinter files ready to print inBambu Studio · OrcaSlicerOrcaSlicer · PrusaSlicer

Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.

Questions

Which is bigger, the Bambu Lab P1S or the Prusa MK4S?

The Bambu Lab P1S has the larger build volume: 256 × 256 × 250 mm, against 250 × 210 × 220 mm on the Prusa MK4S.

Which is faster, the Bambu Lab P1S or the Prusa MK4S?

On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 41 minutes on the Bambu Lab P1S and about 59 minutes on the Prusa MK4S. A rough estimate; your slicer's time is the one to trust.

Can both print in several colours?

The Bambu Lab P1S: yes, with its filament changer (AMS, 4 filaments a unit). The Prusa MK4S: yes, with its filament changer (MMU3, 5 filaments).

Free tools for your printer

Figures from each slicer's own printer profile, checked 2026-11-15.