TerraPrinterLaunched in March 2025
Make your own

Creality K1 Max vs Bambu Lab X1 Carbon

The Creality K1 Max and the Bambu Lab X1 Carbon side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.

The Creality K1 Max has the larger build volume: 300 × 300 × 300 mm, against 256 × 256 × 250 mm on the Bambu Lab X1 Carbon.

Only the Bambu Lab X1 Carbon prints several filaments by itself.

At the default speeds of their slicer profiles, the Bambu Lab X1 Carbon prints our 100 mm terrain tile in about 41 minutes and the Creality K1 Max in about 63 minutes.

Creality K1 MaxBambu Lab X1 Carbon
BrandCrealityBambu Lab
Build volume300 × 300 × 300 mm256 × 256 × 250 mm
Largest model, one colourAbout 290 × 290 mmAbout 230 × 230 mm
Largest model, multicolour–About 190 × 190 mm
ColourOne filament at a timeAMS, 4 filaments a unit
Slicer profileOrcaSlicerBambu Studio
Default layer height0.2 mm0.2 mm
Outer wall speed200 mm/s200 mm/s
Infill speed270 mm/s270 mm/s
Acceleration10000 mm/s²10000 mm/s²
Maximum flow (PLA)12 mm³/s21 mm³/s
100 mm terrain tile, estimated≈ 63 min≈ 41 min
20 mm calibration cube, estimated≈ 12 min≈ 10 min
Opens TerraPrinter files ready to print inOrcaSlicerBambu Studio · OrcaSlicer

Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.

Questions

Which is bigger, the Creality K1 Max or the Bambu Lab X1 Carbon?

The Creality K1 Max has the larger build volume: 300 × 300 × 300 mm, against 256 × 256 × 250 mm on the Bambu Lab X1 Carbon.

Which is faster, the Creality K1 Max or the Bambu Lab X1 Carbon?

On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 63 minutes on the Creality K1 Max and about 41 minutes on the Bambu Lab X1 Carbon. A rough estimate; your slicer's time is the one to trust.

Can both print in several colours?

The Creality K1 Max prints one filament at a time; change filament by height for colour. The Bambu Lab X1 Carbon: yes, with its filament changer (AMS, 4 filaments a unit).

Free tools for your printer

Figures from each slicer's own printer profile, checked 2026-11-15.