Creality K1C vs Bambu Lab P1S
The Creality K1C and the Bambu Lab P1S side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.
The Bambu Lab P1S has the larger build volume: 256 × 256 × 250 mm, against 220 × 220 × 250 mm on the Creality K1C.
Only the Bambu Lab P1S prints several filaments by itself.
At the default speeds of their slicer profiles, the Bambu Lab P1S prints our 100 mm terrain tile in about 41 minutes and the Creality K1C in about 55 minutes.
| Creality K1C | Bambu Lab P1S | |
|---|---|---|
| Brand | Creality | Bambu Lab |
| Build volume | 220 × 220 × 250 mm | 256 × 256 × 250 mm |
| Largest model, one colour | About 210 × 210 mm | About 230 × 230 mm |
| Largest model, multicolour | – | About 190 × 190 mm |
| Colour | One filament at a time | AMS, 4 filaments a unit |
| Slicer profile | OrcaSlicer | Bambu Studio |
| Default layer height | 0.2 mm | 0.2 mm |
| Outer wall speed | 200 mm/s | 200 mm/s |
| Infill speed | 270 mm/s | 270 mm/s |
| Acceleration | 10000 mm/s² | 10000 mm/s² |
| Maximum flow (PLA) | 14 mm³/s | 21 mm³/s |
| 100 mm terrain tile, estimated | ≈ 55 min | ≈ 41 min |
| 20 mm calibration cube, estimated | ≈ 11 min | ≈ 10 min |
| Opens TerraPrinter files ready to print in | OrcaSlicer | Bambu Studio · OrcaSlicer |
Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.
Questions
Which is bigger, the Creality K1C or the Bambu Lab P1S?
The Bambu Lab P1S has the larger build volume: 256 × 256 × 250 mm, against 220 × 220 × 250 mm on the Creality K1C.
Which is faster, the Creality K1C or the Bambu Lab P1S?
On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 55 minutes on the Creality K1C and about 41 minutes on the Bambu Lab P1S. A rough estimate; your slicer's time is the one to trust.
Can both print in several colours?
The Creality K1C prints one filament at a time; change filament by height for colour. The Bambu Lab P1S: yes, with its filament changer (AMS, 4 filaments a unit).
Free tools for your printer
Figures from each slicer's own printer profile, checked 2026-11-15.