TerraPrinterLaunched in March 2025
Make your own

Creality K1 vs Bambu Lab P1S

The Creality K1 and the Bambu Lab P1S side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.

The Bambu Lab P1S has the larger build volume: 256 × 256 × 250 mm, against 220 × 220 × 250 mm on the Creality K1.

Only the Bambu Lab P1S prints several filaments by itself.

At the default speeds of their slicer profiles, the Bambu Lab P1S prints our 100 mm terrain tile in about 41 minutes and the Creality K1 in about 63 minutes.

Creality K1Bambu Lab P1S
BrandCrealityBambu Lab
Build volume220 × 220 × 250 mm256 × 256 × 250 mm
Largest model, one colourAbout 210 × 210 mmAbout 230 × 230 mm
Largest model, multicolour–About 190 × 190 mm
ColourOne filament at a timeAMS, 4 filaments a unit
Slicer profileOrcaSlicerBambu Studio
Default layer height0.2 mm0.2 mm
Outer wall speed200 mm/s200 mm/s
Infill speed270 mm/s270 mm/s
Acceleration10000 mm/s²10000 mm/s²
Maximum flow (PLA)12 mm³/s21 mm³/s
100 mm terrain tile, estimated≈ 63 min≈ 41 min
20 mm calibration cube, estimated≈ 12 min≈ 10 min
Opens TerraPrinter files ready to print inOrcaSlicerBambu Studio · OrcaSlicer

Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.

Questions

Which is bigger, the Creality K1 or the Bambu Lab P1S?

The Bambu Lab P1S has the larger build volume: 256 × 256 × 250 mm, against 220 × 220 × 250 mm on the Creality K1.

Which is faster, the Creality K1 or the Bambu Lab P1S?

On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 63 minutes on the Creality K1 and about 41 minutes on the Bambu Lab P1S. A rough estimate; your slicer's time is the one to trust.

Can both print in several colours?

The Creality K1 prints one filament at a time; change filament by height for colour. The Bambu Lab P1S: yes, with its filament changer (AMS, 4 filaments a unit).

Free tools for your printer

Figures from each slicer's own printer profile, checked 2026-11-15.