Bambu Lab H2S vs Bambu Lab P2S
The Bambu Lab H2S and the Bambu Lab P2S side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.
The Bambu Lab H2S has the larger build volume: 340 × 320 × 340 mm, against 256 × 256 × 256 mm on the Bambu Lab P2S.
At the default speeds of their slicer profiles, the Bambu Lab H2S prints our 100 mm terrain tile in about 36 minutes and the Bambu Lab P2S in about 41 minutes.
| Bambu Lab H2S | Bambu Lab P2S | |
|---|---|---|
| Brand | Bambu Lab | Bambu Lab |
| Build volume | 340 × 320 × 340 mm | 256 × 256 × 256 mm |
| Largest model, one colour | About 310 × 310 mm | About 246 × 246 mm |
| Largest model, multicolour | About 250 × 250 mm | About 190 × 190 mm |
| Colour | AMS, 4 filaments a unit | AMS, 4 filaments a unit |
| Slicer profile | Bambu Studio | Bambu Studio |
| Default layer height | 0.2 mm | 0.2 mm |
| Outer wall speed | 200 mm/s | 200 mm/s |
| Infill speed | 350 mm/s | 270 mm/s |
| Acceleration | 10000 mm/s² | 10000 mm/s² |
| Maximum flow (PLA) | 25 mm³/s | 21 mm³/s |
| 100 mm terrain tile, estimated | ≈ 36 min | ≈ 41 min |
| 20 mm calibration cube, estimated | ≈ 9 min | ≈ 10 min |
| Opens TerraPrinter files ready to print in | Bambu Studio · OrcaSlicer | Bambu Studio · OrcaSlicer |
Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.
Questions
Which is bigger, the Bambu Lab H2S or the Bambu Lab P2S?
The Bambu Lab H2S has the larger build volume: 340 × 320 × 340 mm, against 256 × 256 × 256 mm on the Bambu Lab P2S.
Which is faster, the Bambu Lab H2S or the Bambu Lab P2S?
On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 36 minutes on the Bambu Lab H2S and about 41 minutes on the Bambu Lab P2S. A rough estimate; your slicer's time is the one to trust.
Can both print in several colours?
The Bambu Lab H2S: yes, with its filament changer (AMS, 4 filaments a unit). The Bambu Lab P2S: yes, with its filament changer (AMS, 4 filaments a unit).
Free tools for your printer
Figures from each slicer's own printer profile, checked 2026-11-15.