Bambu Lab H2D vs Bambu Lab X2D
The Bambu Lab H2D and the Bambu Lab X2D side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.
The Bambu Lab H2D has the larger build volume: 325 × 320 × 325 mm, against 256 × 256 × 261 mm on the Bambu Lab X2D.
At the default speeds of their slicer profiles, the Bambu Lab H2D prints our 100 mm terrain tile in about 36 minutes and the Bambu Lab X2D in about 41 minutes.
| Bambu Lab H2D | Bambu Lab X2D | |
|---|---|---|
| Brand | Bambu Lab | Bambu Lab |
| Build volume | 325 × 320 × 325 mm | 256 × 256 × 261 mm |
| Largest model, one colour | About 310 × 310 mm | About 246 × 246 mm |
| Largest model, multicolour | About 265 × 265 mm | About 195 × 195 mm |
| Colour | AMS, 4 filaments a unit, two nozzles | AMS, 4 filaments a unit, two nozzles |
| Slicer profile | OrcaSlicer | OrcaSlicer |
| Default layer height | 0.2 mm | 0.2 mm |
| Outer wall speed | 200 mm/s | 200 mm/s |
| Infill speed | 350 mm/s | 270 mm/s |
| Acceleration | 8000 mm/s² | 10000 mm/s² |
| Maximum flow (PLA) | 25 mm³/s | 21 mm³/s |
| 100 mm terrain tile, estimated | ≈ 36 min | ≈ 41 min |
| 20 mm calibration cube, estimated | ≈ 9 min | ≈ 10 min |
| Opens TerraPrinter files ready to print in | OrcaSlicer | OrcaSlicer |
Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.
Questions
Which is bigger, the Bambu Lab H2D or the Bambu Lab X2D?
The Bambu Lab H2D has the larger build volume: 325 × 320 × 325 mm, against 256 × 256 × 261 mm on the Bambu Lab X2D.
Which is faster, the Bambu Lab H2D or the Bambu Lab X2D?
On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 36 minutes on the Bambu Lab H2D and about 41 minutes on the Bambu Lab X2D. A rough estimate; your slicer's time is the one to trust.
Can both print in several colours?
The Bambu Lab H2D: yes, with its filament changer (AMS, 4 filaments a unit, two nozzles). The Bambu Lab X2D: yes, with its filament changer (AMS, 4 filaments a unit, two nozzles).
Free tools for your printer
Figures from each slicer's own printer profile, checked 2026-11-15.