TerraPrinterLaunched in March 2025
Make your own

Bambu Lab H2D vs Bambu Lab H2S

The Bambu Lab H2D and the Bambu Lab H2S side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.

The Bambu Lab H2S has the larger build volume: 340 × 320 × 340 mm, against 325 × 320 × 325 mm on the Bambu Lab H2D.

Bambu Lab H2DBambu Lab H2S
BrandBambu LabBambu Lab
Build volume325 × 320 × 325 mm340 × 320 × 340 mm
Largest model, one colourAbout 310 × 310 mmAbout 310 × 310 mm
Largest model, multicolourAbout 265 × 265 mmAbout 250 × 250 mm
ColourAMS, 4 filaments a unit, two nozzlesAMS, 4 filaments a unit
Slicer profileOrcaSlicerBambu Studio
Default layer height0.2 mm0.2 mm
Outer wall speed200 mm/s200 mm/s
Infill speed350 mm/s350 mm/s
Acceleration8000 mm/s²10000 mm/s²
Maximum flow (PLA)25 mm³/s25 mm³/s
100 mm terrain tile, estimated≈ 36 min≈ 36 min
20 mm calibration cube, estimated≈ 9 min≈ 9 min
Opens TerraPrinter files ready to print inOrcaSlicerBambu Studio · OrcaSlicer

Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.

Questions

Which is bigger, the Bambu Lab H2D or the Bambu Lab H2S?

The Bambu Lab H2S has the larger build volume: 340 × 320 × 340 mm, against 325 × 320 × 325 mm on the Bambu Lab H2D.

Which is faster, the Bambu Lab H2D or the Bambu Lab H2S?

On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 36 minutes on the Bambu Lab H2D and about 36 minutes on the Bambu Lab H2S. A rough estimate; your slicer's time is the one to trust.

Can both print in several colours?

The Bambu Lab H2D: yes, with its filament changer (AMS, 4 filaments a unit, two nozzles). The Bambu Lab H2S: yes, with its filament changer (AMS, 4 filaments a unit).

Free tools for your printer

Figures from each slicer's own printer profile, checked 2026-11-15.