TerraPrinterLaunched in March 2025
Make your own

Bambu Lab H2C vs Bambu Lab H2D

The Bambu Lab H2C and the Bambu Lab H2D side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.

Both have about the same build volume, 325 × 320 × 320 mm.

Bambu Lab H2CBambu Lab H2D
BrandBambu LabBambu Lab
Build volume325 × 320 × 320 mm325 × 320 × 325 mm
Largest model, one colourAbout 310 × 310 mmAbout 310 × 310 mm
Largest model, multicolourAbout 245 × 245 mmAbout 265 × 265 mm
ColourVortek hotend changer with AMS, up to 24 filamentsAMS, 4 filaments a unit, two nozzles
Slicer profileOrcaSlicerOrcaSlicer
Default layer height0.2 mm0.2 mm
Outer wall speed200 mm/s200 mm/s
Infill speed350 mm/s350 mm/s
Acceleration8000 mm/s²8000 mm/s²
Maximum flow (PLA)25 mm³/s25 mm³/s
100 mm terrain tile, estimated≈ 36 min≈ 36 min
20 mm calibration cube, estimated≈ 9 min≈ 9 min
Opens TerraPrinter files ready to print inOrcaSlicerOrcaSlicer

Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.

Questions

Which is bigger, the Bambu Lab H2C or the Bambu Lab H2D?

Both have about the same build volume, 325 × 320 × 320 mm.

Which is faster, the Bambu Lab H2C or the Bambu Lab H2D?

On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 36 minutes on the Bambu Lab H2C and about 36 minutes on the Bambu Lab H2D. A rough estimate; your slicer's time is the one to trust.

Can both print in several colours?

The Bambu Lab H2C: yes, with its filament changer (Vortek hotend changer with AMS, up to 24 filaments). The Bambu Lab H2D: yes, with its filament changer (AMS, 4 filaments a unit, two nozzles).

Free tools for your printer

Figures from each slicer's own printer profile, checked 2026-11-15.