Creality Ender-3 V3 vs Creality K1C
The Creality Ender-3 V3 and the Creality K1C side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.
Both have about the same build volume, 220 × 220 × 250 mm.
| Creality Ender-3 V3 | Creality K1C | |
|---|---|---|
| Brand | Creality | Creality |
| Build volume | 220 × 220 × 250 mm | 220 × 220 × 250 mm |
| Largest model, one colour | About 210 × 210 mm | About 210 × 210 mm |
| Largest model, multicolour | – | – |
| Colour | One filament at a time | One filament at a time |
| Slicer profile | OrcaSlicer | OrcaSlicer |
| Default layer height | 0.2 mm | 0.2 mm |
| Outer wall speed | 200 mm/s | 200 mm/s |
| Infill speed | 500 mm/s | 270 mm/s |
| Acceleration | 12000 mm/s² | 10000 mm/s² |
| Maximum flow (PLA) | 14 mm³/s | 14 mm³/s |
| 100 mm terrain tile, estimated | ≈ 55 min | ≈ 55 min |
| 20 mm calibration cube, estimated | ≈ 11 min | ≈ 11 min |
| Opens TerraPrinter files ready to print in | OrcaSlicer | OrcaSlicer |
Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.
Questions
Which is bigger, the Creality Ender-3 V3 or the Creality K1C?
Both have about the same build volume, 220 × 220 × 250 mm.
Which is faster, the Creality Ender-3 V3 or the Creality K1C?
On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 55 minutes on the Creality Ender-3 V3 and about 55 minutes on the Creality K1C. A rough estimate; your slicer's time is the one to trust.
Can both print in several colours?
The Creality Ender-3 V3 prints one filament at a time; change filament by height for colour. The Creality K1C prints one filament at a time; change filament by height for colour.
Free tools for your printer
Figures from each slicer's own printer profile, checked 2026-11-15.