TerraPrinterLaunched in March 2025
Make your own

Prusa CORE One vs Bambu Lab X1 Carbon

The Prusa CORE One and the Bambu Lab X1 Carbon side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.

The Bambu Lab X1 Carbon has the larger build volume: 256 × 256 × 250 mm, against 250 × 220 × 270 mm on the Prusa CORE One.

At the default speeds of their slicer profiles, the Bambu Lab X1 Carbon prints our 100 mm terrain tile in about 41 minutes and the Prusa CORE One in about 59 minutes.

Prusa CORE OneBambu Lab X1 Carbon
BrandPrusaBambu Lab
Build volume250 × 220 × 270 mm256 × 256 × 250 mm
Largest model, one colourAbout 210 × 210 mmAbout 230 × 230 mm
Largest model, multicolourAbout 185 × 185 mmAbout 190 × 190 mm
ColourMMU3, 5 filamentsAMS, 4 filaments a unit
Slicer profilePrusaSlicerBambu Studio
Default layer height0.2 mm0.2 mm
Outer wall speed170 mm/s200 mm/s
Infill speed200 mm/s270 mm/s
Acceleration3000 mm/s²10000 mm/s²
Maximum flow (PLA)15 mm³/s21 mm³/s
100 mm terrain tile, estimated≈ 59 min≈ 41 min
20 mm calibration cube, estimated≈ 12 min≈ 10 min
Opens TerraPrinter files ready to print inOrcaSlicer · PrusaSlicerBambu Studio · OrcaSlicer

Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.

Questions

Which is bigger, the Prusa CORE One or the Bambu Lab X1 Carbon?

The Bambu Lab X1 Carbon has the larger build volume: 256 × 256 × 250 mm, against 250 × 220 × 270 mm on the Prusa CORE One.

Which is faster, the Prusa CORE One or the Bambu Lab X1 Carbon?

On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 59 minutes on the Prusa CORE One and about 41 minutes on the Bambu Lab X1 Carbon. A rough estimate; your slicer's time is the one to trust.

Can both print in several colours?

The Prusa CORE One: yes, with its filament changer (MMU3, 5 filaments). The Bambu Lab X1 Carbon: yes, with its filament changer (AMS, 4 filaments a unit).

Free tools for your printer

Figures from each slicer's own printer profile, checked 2026-11-15.