TerraPrinterLaunched in March 2025
Make your own

Prusa CORE One vs Prusa MK4S

The Prusa CORE One and the Prusa MK4S side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.

The Prusa CORE One has the larger build volume: 250 × 220 × 270 mm, against 250 × 210 × 220 mm on the Prusa MK4S.

Prusa CORE OnePrusa MK4S
BrandPrusaPrusa
Build volume250 × 220 × 270 mm250 × 210 × 220 mm
Largest model, one colourAbout 210 × 210 mmAbout 200 × 200 mm
Largest model, multicolourAbout 185 × 185 mmAbout 185 × 185 mm
ColourMMU3, 5 filamentsMMU3, 5 filaments
Slicer profilePrusaSlicerPrusaSlicer
Default layer height0.2 mm0.2 mm
Outer wall speed170 mm/s170 mm/s
Infill speed200 mm/s200 mm/s
Acceleration3000 mm/s²4000 mm/s²
Maximum flow (PLA)15 mm³/s15 mm³/s
100 mm terrain tile, estimated≈ 59 min≈ 59 min
20 mm calibration cube, estimated≈ 12 min≈ 12 min
Opens TerraPrinter files ready to print inOrcaSlicer · PrusaSlicerOrcaSlicer · PrusaSlicer

Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.

Questions

Which is bigger, the Prusa CORE One or the Prusa MK4S?

The Prusa CORE One has the larger build volume: 250 × 220 × 270 mm, against 250 × 210 × 220 mm on the Prusa MK4S.

Which is faster, the Prusa CORE One or the Prusa MK4S?

On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 59 minutes on the Prusa CORE One and about 59 minutes on the Prusa MK4S. A rough estimate; your slicer's time is the one to trust.

Can both print in several colours?

The Prusa CORE One: yes, with its filament changer (MMU3, 5 filaments). The Prusa MK4S: yes, with its filament changer (MMU3, 5 filaments).

Free tools for your printer

Figures from each slicer's own printer profile, checked 2026-11-15.