Prusa CORE One vs Bambu Lab P2S
The Prusa CORE One and the Bambu Lab P2S side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.
The Bambu Lab P2S has the larger build volume: 256 × 256 × 256 mm, against 250 × 220 × 270 mm on the Prusa CORE One.
At the default speeds of their slicer profiles, the Bambu Lab P2S prints our 100 mm terrain tile in about 41 minutes and the Prusa CORE One in about 59 minutes.
| Prusa CORE One | Bambu Lab P2S | |
|---|---|---|
| Brand | Prusa | Bambu Lab |
| Build volume | 250 × 220 × 270 mm | 256 × 256 × 256 mm |
| Largest model, one colour | About 210 × 210 mm | About 246 × 246 mm |
| Largest model, multicolour | About 185 × 185 mm | About 190 × 190 mm |
| Colour | MMU3, 5 filaments | AMS, 4 filaments a unit |
| Slicer profile | PrusaSlicer | Bambu Studio |
| Default layer height | 0.2 mm | 0.2 mm |
| Outer wall speed | 170 mm/s | 200 mm/s |
| Infill speed | 200 mm/s | 270 mm/s |
| Acceleration | 3000 mm/s² | 10000 mm/s² |
| Maximum flow (PLA) | 15 mm³/s | 21 mm³/s |
| 100 mm terrain tile, estimated | ≈ 59 min | ≈ 41 min |
| 20 mm calibration cube, estimated | ≈ 12 min | ≈ 10 min |
| Opens TerraPrinter files ready to print in | OrcaSlicer · PrusaSlicer | Bambu Studio · OrcaSlicer |
Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.
Questions
Which is bigger, the Prusa CORE One or the Bambu Lab P2S?
The Bambu Lab P2S has the larger build volume: 256 × 256 × 256 mm, against 250 × 220 × 270 mm on the Prusa CORE One.
Which is faster, the Prusa CORE One or the Bambu Lab P2S?
On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 59 minutes on the Prusa CORE One and about 41 minutes on the Bambu Lab P2S. A rough estimate; your slicer's time is the one to trust.
Can both print in several colours?
The Prusa CORE One: yes, with its filament changer (MMU3, 5 filaments). The Bambu Lab P2S: yes, with its filament changer (AMS, 4 filaments a unit).
Free tools for your printer
Figures from each slicer's own printer profile, checked 2026-11-15.