Bambu Lab A1 vs Bambu Lab X1 Carbon
The Bambu Lab A1 and the Bambu Lab X1 Carbon side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.
Both have about the same build volume, 256 × 256 × 256 mm.
At the default speeds of their slicer profiles, the Bambu Lab X1 Carbon prints our 100 mm terrain tile in about 41 minutes and the Bambu Lab A1 in about 44 minutes.
| Bambu Lab A1 | Bambu Lab X1 Carbon | |
|---|---|---|
| Brand | Bambu Lab | Bambu Lab |
| Build volume | 256 × 256 × 256 mm | 256 × 256 × 250 mm |
| Largest model, one colour | About 246 × 246 mm | About 230 × 230 mm |
| Largest model, multicolour | About 190 × 190 mm | About 190 × 190 mm |
| Colour | AMS Lite, 4 filaments | AMS, 4 filaments a unit |
| Slicer profile | Bambu Studio | Bambu Studio |
| Default layer height | 0.2 mm | 0.2 mm |
| Outer wall speed | 200 mm/s | 200 mm/s |
| Infill speed | 270 mm/s | 270 mm/s |
| Acceleration | 6000 mm/s² | 10000 mm/s² |
| Maximum flow (PLA) | 21 mm³/s | 21 mm³/s |
| 100 mm terrain tile, estimated | ≈ 44 min | ≈ 41 min |
| 20 mm calibration cube, estimated | ≈ 10 min | ≈ 10 min |
| Opens TerraPrinter files ready to print in | Bambu Studio · OrcaSlicer | Bambu Studio · OrcaSlicer |
Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.
Questions
Which is bigger, the Bambu Lab A1 or the Bambu Lab X1 Carbon?
Both have about the same build volume, 256 × 256 × 256 mm.
Which is faster, the Bambu Lab A1 or the Bambu Lab X1 Carbon?
On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 44 minutes on the Bambu Lab A1 and about 41 minutes on the Bambu Lab X1 Carbon. A rough estimate; your slicer's time is the one to trust.
Can both print in several colours?
The Bambu Lab A1: yes, with its filament changer (AMS Lite, 4 filaments). The Bambu Lab X1 Carbon: yes, with its filament changer (AMS, 4 filaments a unit).
Free tools for your printer
Figures from each slicer's own printer profile, checked 2026-11-15.