Bambu Lab A1 vs Prusa MK4S
The Bambu Lab A1 and the Prusa MK4S side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.
The Bambu Lab A1 has the larger build volume: 256 × 256 × 256 mm, against 250 × 210 × 220 mm on the Prusa MK4S.
At the default speeds of their slicer profiles, the Bambu Lab A1 prints our 100 mm terrain tile in about 44 minutes and the Prusa MK4S in about 59 minutes.
| Bambu Lab A1 | Prusa MK4S | |
|---|---|---|
| Brand | Bambu Lab | Prusa |
| Build volume | 256 × 256 × 256 mm | 250 × 210 × 220 mm |
| Largest model, one colour | About 246 × 246 mm | About 200 × 200 mm |
| Largest model, multicolour | About 190 × 190 mm | About 185 × 185 mm |
| Colour | AMS Lite, 4 filaments | MMU3, 5 filaments |
| Slicer profile | Bambu Studio | PrusaSlicer |
| Default layer height | 0.2 mm | 0.2 mm |
| Outer wall speed | 200 mm/s | 170 mm/s |
| Infill speed | 270 mm/s | 200 mm/s |
| Acceleration | 6000 mm/s² | 4000 mm/s² |
| Maximum flow (PLA) | 21 mm³/s | 15 mm³/s |
| 100 mm terrain tile, estimated | ≈ 44 min | ≈ 59 min |
| 20 mm calibration cube, estimated | ≈ 10 min | ≈ 12 min |
| Opens TerraPrinter files ready to print in | Bambu Studio · OrcaSlicer | OrcaSlicer · PrusaSlicer |
Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.
Questions
Which is bigger, the Bambu Lab A1 or the Prusa MK4S?
The Bambu Lab A1 has the larger build volume: 256 × 256 × 256 mm, against 250 × 210 × 220 mm on the Prusa MK4S.
Which is faster, the Bambu Lab A1 or the Prusa MK4S?
On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 44 minutes on the Bambu Lab A1 and about 59 minutes on the Prusa MK4S. A rough estimate; your slicer's time is the one to trust.
Can both print in several colours?
The Bambu Lab A1: yes, with its filament changer (AMS Lite, 4 filaments). The Prusa MK4S: yes, with its filament changer (MMU3, 5 filaments).
Free tools for your printer
Figures from each slicer's own printer profile, checked 2026-11-15.