TerraPrinterLaunched in March 2025
Make your own

Bambu Lab A1 vs Creality K1C

The Bambu Lab A1 and the Creality K1C side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.

The Bambu Lab A1 has the larger build volume: 256 × 256 × 256 mm, against 220 × 220 × 250 mm on the Creality K1C.

Only the Bambu Lab A1 prints several filaments by itself.

At the default speeds of their slicer profiles, the Bambu Lab A1 prints our 100 mm terrain tile in about 44 minutes and the Creality K1C in about 55 minutes.

Bambu Lab A1Creality K1C
BrandBambu LabCreality
Build volume256 × 256 × 256 mm220 × 220 × 250 mm
Largest model, one colourAbout 246 × 246 mmAbout 210 × 210 mm
Largest model, multicolourAbout 190 × 190 mm–
ColourAMS Lite, 4 filamentsOne filament at a time
Slicer profileBambu StudioOrcaSlicer
Default layer height0.2 mm0.2 mm
Outer wall speed200 mm/s200 mm/s
Infill speed270 mm/s270 mm/s
Acceleration6000 mm/s²10000 mm/s²
Maximum flow (PLA)21 mm³/s14 mm³/s
100 mm terrain tile, estimated≈ 44 min≈ 55 min
20 mm calibration cube, estimated≈ 10 min≈ 11 min
Opens TerraPrinter files ready to print inBambu Studio · OrcaSlicerOrcaSlicer

Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.

Questions

Which is bigger, the Bambu Lab A1 or the Creality K1C?

The Bambu Lab A1 has the larger build volume: 256 × 256 × 256 mm, against 220 × 220 × 250 mm on the Creality K1C.

Which is faster, the Bambu Lab A1 or the Creality K1C?

On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 44 minutes on the Bambu Lab A1 and about 55 minutes on the Creality K1C. A rough estimate; your slicer's time is the one to trust.

Can both print in several colours?

The Bambu Lab A1: yes, with its filament changer (AMS Lite, 4 filaments). The Creality K1C prints one filament at a time; change filament by height for colour.

Free tools for your printer

Figures from each slicer's own printer profile, checked 2026-11-15.