Bambu Lab A1 vs Creality Ender-3 V3
The Bambu Lab A1 and the Creality Ender-3 V3 side by side: what fits on each, how they print in colour, the default speeds of their slicer profiles and how long the same model takes.
The Bambu Lab A1 has the larger build volume: 256 × 256 × 256 mm, against 220 × 220 × 250 mm on the Creality Ender-3 V3.
Only the Bambu Lab A1 prints several filaments by itself.
At the default speeds of their slicer profiles, the Bambu Lab A1 prints our 100 mm terrain tile in about 44 minutes and the Creality Ender-3 V3 in about 55 minutes.
| Bambu Lab A1 | Creality Ender-3 V3 | |
|---|---|---|
| Brand | Bambu Lab | Creality |
| Build volume | 256 × 256 × 256 mm | 220 × 220 × 250 mm |
| Largest model, one colour | About 246 × 246 mm | About 210 × 210 mm |
| Largest model, multicolour | About 190 × 190 mm | – |
| Colour | AMS Lite, 4 filaments | One filament at a time |
| Slicer profile | Bambu Studio | OrcaSlicer |
| Default layer height | 0.2 mm | 0.2 mm |
| Outer wall speed | 200 mm/s | 200 mm/s |
| Infill speed | 270 mm/s | 500 mm/s |
| Acceleration | 6000 mm/s² | 12000 mm/s² |
| Maximum flow (PLA) | 21 mm³/s | 14 mm³/s |
| 100 mm terrain tile, estimated | ≈ 44 min | ≈ 55 min |
| 20 mm calibration cube, estimated | ≈ 10 min | ≈ 11 min |
| Opens TerraPrinter files ready to print in | Bambu Studio · OrcaSlicer | OrcaSlicer |
Times are rough estimates from each profile's speeds, at 0.2 mm layers and 15% infill, made the same way as the print time estimator. Expect a slicer to differ by up to about a third.
Questions
Which is bigger, the Bambu Lab A1 or the Creality Ender-3 V3?
The Bambu Lab A1 has the larger build volume: 256 × 256 × 256 mm, against 220 × 220 × 250 mm on the Creality Ender-3 V3.
Which is faster, the Bambu Lab A1 or the Creality Ender-3 V3?
On a 100 mm terrain tile at 0.2 mm layers and 15% infill, with the default speeds of their slicer profiles: about 44 minutes on the Bambu Lab A1 and about 55 minutes on the Creality Ender-3 V3. A rough estimate; your slicer's time is the one to trust.
Can both print in several colours?
The Bambu Lab A1: yes, with its filament changer (AMS Lite, 4 filaments). The Creality Ender-3 V3 prints one filament at a time; change filament by height for colour.
Free tools for your printer
Figures from each slicer's own printer profile, checked 2026-11-15.