Crater
Kepler 3D printable terrain model
A free, print-ready 3D model of Kepler, generated from real elevation data. Download it as STL or 3MF, or customize it first.
Kepler is lunar impact crater.
The model covers about 60 km across, from -3,073 m to 151 m relative to the Moon's reference radius – 3,224 m of relief.
Generate & downloadQuick facts
- Location
- Moon
- Coordinates
- 8.1210° N, 38.0087° W
- Area modelled
- 60 km across
- Highest point in model
- 151 m
- Lowest point in model
- -3,073 m
- Relief
- 3,224 m
Printing tips for Kepler
- Planet-scale areas print almost flat at true scale, so the model starts at 4× vertical exaggeration: raise it for broad basins, lower it for steep volcanoes.
- A 150–200 mm print fits most printers; for bigger displays, use multi-tile mode and print it in pieces.
- Print at 0.12–0.16 mm layer height for smooth slopes and fine ridges, with 10–15% infill.
- A single grey, rust or sand-coloured filament suits it best; print a small test piece first to check the exaggeration.
Questions
Is the Kepler 3D model free?
Yes. TerraPrinter is free with no account needed: generate the model in your browser and download it as STL, 3MF, GLB or OBJ.
Which file format should I use for printing?
STL works with every slicer. 3MF keeps terrain, water, roads and buildings as separate colored parts, which is ideal for multi-color printers.
How big will the print be?
You choose: the default is 200 mm on the longest side. Larger models can be split into tiles or jigsaw puzzle pieces that fit your print bed.
Where does the terrain data come from?
Elevation comes from NASA's LRO LOLA laser altimeter merged with JAXA Kaguya stereo data (59 m resolution, 118 m near the poles), via the USGS Astrogeology Science Center.
More craters
More on the Moon
Facts from Wikidata (CC0). Positions: IAU/USGS Gazetteer of Planetary Nomenclature. Elevation: LRO LOLA (NASA/GSFC) and SELENE/Kaguya (JAXA) via USGS.