Saskatchewan Legislative Building 3D model
A free, print-ready model of the Saskatchewan Legislative Building in Regina, Canada. Download it on its own with a name plate, or print it standing on the real terrain around it.
- Location
- Regina, Canada
- Height
- 62 m
- Completed
- 1912
- Designed by
- Edward and William Sutherland Maxwell
- Also known as
- Saskatchewan Legislative Building
- Print size
- 326 × 204 × 120 mm at the default height
- Supports
- None needed
About the Saskatchewan Legislative Building
Completed in 1912 beside Wascana Lake in Regina, the Saskatchewan Legislative Building is faced with Tyndall stone and has a cross-shaped plan under its dome.
What the model includes
The long wings and the central cross, the columned portico and the dome on its drum.
It is built from simple closed solids, so it slices cleanly and stands flat. In the download window you can set the height from 30 to 250 mm and add a base plate with the name in raised letters. The mesh has about 2,892 triangles, small enough to open in any slicer.
Print the Saskatchewan Legislative Building on its real terrain
Map data stores most buildings as a flat outline with a height, so the Saskatchewan Legislative Building would normally print as a plain block. In TerraPrinter, this model takes its place automatically. It is turned to match the outline in the map data and stands on the real elevation, with the streets, water and buildings around it.
More 3D landmarks
Questions
Is the Saskatchewan Legislative Building 3D model free?
Yes. You can download the Saskatchewan Legislative Building as an STL or 3MF for free, without an account, and print it as many times as you like.
What size should I print the Saskatchewan Legislative Building?
At the default height of 120 mm it measures 326 × 204 × 120 mm. Pick any height from 30 to 250 mm before downloading. Thin parts like spires and antennas print better at 100 mm and up on a 0.4 mm nozzle.
Do I need supports?
No. The model stands flat on its base and prints upright without supports.
Can I print the Saskatchewan Legislative Building with the city around it?
Yes. "Print on its terrain" opens TerraPrinter with the area around the Saskatchewan Legislative Building selected. When you generate the model, this landmark replaces the plain block from the map data and stands on the real terrain with the surrounding streets and buildings.