British Columbia Parliament Buildings 3D model
A free, print-ready model of the British Columbia Parliament Buildings in Victoria, Canada. Download it on its own with a name plate, or print it standing on the real terrain around it.
- Location
- Victoria, Canada
- Height
- 50 m
- Completed
- 1898
- Designed by
- Francis Rattenbury
- Also known as
- British Columbia Parliament Buildings
- Print size
- 363 × 174 × 120 mm at the default height
- Supports
- None needed
About the British Columbia Parliament Buildings
Completed in 1898, the British Columbia Parliament Buildings face Victoria's Inner Harbour. A gilded statue of George Vancouver stands on the central dome, and thousands of lights outline the building at night.
What the model includes
The long façade with its end pavilions, the columned entrance and the central dome.
It is built from simple closed solids, so it slices cleanly and stands flat. In the download window you can set the height from 30 to 250 mm and add a base plate with the name in raised letters. The mesh has about 2,580 triangles, small enough to open in any slicer.
Print the British Columbia Parliament Buildings on its real terrain
Map data stores most buildings as a flat outline with a height, so the British Columbia Parliament Buildings would normally print as a plain block. In TerraPrinter, this model takes its place automatically. It is turned to match the outline in the map data and stands on the real elevation, with the streets, water and buildings around it.
More 3D landmarks
Questions
Is the British Columbia Parliament Buildings 3D model free?
Yes. You can download the British Columbia Parliament Buildings as an STL or 3MF for free, without an account, and print it as many times as you like.
What size should I print the British Columbia Parliament Buildings?
At the default height of 120 mm it measures 363 × 174 × 120 mm. Pick any height from 30 to 250 mm before downloading. Thin parts like spires and antennas print better at 100 mm and up on a 0.4 mm nozzle.
Do I need supports?
No. The model stands flat on its base and prints upright without supports.
Can I print the British Columbia Parliament Buildings with the city around it?
Yes. "Print on its terrain" opens TerraPrinter with the area around the British Columbia Parliament Buildings selected. When you generate the model, this landmark replaces the plain block from the map data and stands on the real terrain with the surrounding streets and buildings.